1.中埋式止水带分类：从结构形式上可分为CB型止水带和CP型止水带两种。CB型止水带是指中间有孔的中埋式止水带，可分为CB型橡胶止水带、CB型塑料止水带两类。主要适用于各种混凝土构筑物的伸缩缝、沉降缝及防震缝等，具有与混凝土锚固紧密、止水密封和适应变形缝伸缩变形的能力等。CP型止水带是指中间无孔的中埋式止水带，可分为CP型橡胶止水带、CP型塑料止水带两种。主要适用于各种变形量不大的混凝土构筑物的施工缝、完全收缩缝、不完全收缩缝、伸缩缝等，具有与混凝土锚固紧密、止水密封及弹性拉伸变形等特点。
1. classification of embedded water stop belt: from the structure form can be divided into CB type water stop belt and CP type water stop two kinds. CB type water stop belt refers to the middle buried water stop with holes in it, which can be divided into two types: CB rubber water stop belt and CB plastic water stop belt. Mainly applicable to all kinds of concrete structures of expansion joints, settlement joints and seismic joints, etc., with concrete anchor tight, water seal and adapt to deformation joint expansion and deformation ability excellent. CP type water stop belt refers to the middle hole free water stop belt, which can be divided into two types: CP rubber water stop belt and CP plastic water stop belt. The construction is mainly applicable to a variety of small deformation of concrete structures in the joints, full contraction joints and incomplete contraction joints, expansion joints, anchorage and concrete, has the characteristics of tight seal and elastic tensile deformation etc..
2.中埋式橡胶止水带止水原理：中埋式橡胶止水带的作用和原理与背贴式橡胶止水带相同，它是利用橡胶的高弹性，在各种荷载下产生弹性变形，从而起到坚固密封，有效地防止建筑构造的漏水，渗水并起到减震缓冲作用。在许多工程建筑设计中，土建、水土结构之间都有一定的伸缩要求，并存在防水防震等问题，因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内，与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等，确保工程建设的使用寿命。
后浇带651橡胶止水带 131 6657 0832
后浇带651橡胶止水带 131 6657 0832
2. embedded rubber water stop belt waterstop principle: embedded rubber waterstop effect and principle and back stick type rubber strip of the same, it is the use of high elastic rubber, produce elastic deformation under various loads, so as to strengthen the sealing, effectively prevent the construction of the Water Leakage, seepage and the shock buffer. In many engineering architectural design, there are certain requirements between the telescopic construction, soil structure, and there are problems such as waterproof and shockproof, so using and installing the rubber sealing strip is effective means to solve these problems. This product is mainly used in concrete cast-in-place construction joints and deformation joints, and foundation engineering, concrete structure has become one of the underground facilities, tunnel, culvert aqueduct, dam etc., to ensure the construction of service life.
3.中埋式橡胶止水带接头方法有两种：一种是采用粘接剂进行冷接头，一种是使用热硫化模具进行热接。下边就分别介绍下两种接头方法：粘接剂冷接是采用橡胶止水带专用冷接胶水、采用搭接法把止水带需要接头的断面用磨光机磨平5~10厘米、涂胶水压实即可，具有强度高、凝固快的优点、施工方便、省时省力，可达到一般工程质量要求。现场热接硫化法接头是使用与止水带匹配的热硫化模具及生胶片现场硫化热接，施工难度大，但接头效果理想，适合对工程质量要求严格的项目。在我公司采购橡胶止水带的客户，我公司可以提供相关的视频教程。
There are two kinds of joint methods for 3. medium buried rubber water stop strips: one is to use adhesive for cold joint, and the other is to use hot vulcanization mold to heat connection. Below introduces two kinds of adhesive joint method: cold connection is the use of rubber sealing strip with special cold glue, overlapped by the waterstop joints with grinder grinding section to 5~10 cm, glue can be compacted, has high strength, fast solidification has the advantages of convenient, time-saving, can meet the general engineering quality request. The spot heat transfer vulcanization joint is the heat vulcanization mold matched with the water stop strip and the field heat vulcanizing of the raw film. The construction is difficult, but the joint effect is ideal, which is suitable for the strict requirements of the project quality. In our company to buy rubber waterproof belt customers, our company can provide related video tutorials.
后浇带651橡胶止水带 131 6657 0832
后浇带651橡胶止水带 131 6657 0832
